fix(pairing): Direct AP 网关地址被挤出二维码,修复我上一版引入的回退
手机端诊断给出了决定性证据。二维码广播的三个地址是: 192.168.8.68、192.168.30.1、192.168.31.1 而手机连上 Direct AP 后拿到的是 192.168.137.200/24、网关 192.168.137.1 ——**码里根本没有它能到达的那个地址**。 回退是我造成的。上一版为了让真实网卡优先,把 192.168.137.1 / 192.168.49.1 这两个猜测性兜底地址挪到了列表末尾;而二维码只取前 3 个。二维码是在 点「启动接收」的瞬间生成的,此时 ICS 虚拟网卡往往还没拿到 IP,因此 不会出现在 get_if_addrs 里,只能靠那两个兜底地址补位——一挪到末尾就被 截断掉了。表现是"Wi-Fi 已连接但找不到电脑",从现象几乎无法反推到这里。 改动 - 新增 pairing::qr_endpoints(port, direct_ap_active):Direct AP 启用时 把 ICS 网关地址强制放到最前,未启用时维持真实网卡优先 - 二维码端点上限 3 → 4,以便同时容纳 AP 网关与常规局域网地址 - Windows 接收页新增可展开的「二维码广播的地址」列表。手机报"找不到 电脑"时,第一件要确认的就是码里有没有它能到达的地址——现在一眼可见, 不必等手机端诊断 测试:新增三项,分别锁住「AP 网关必须排第一」「即使网卡很多也不能被 长度上限截断」「未开 AP 时不该让猜测地址占位」。cargo test 43/43。 注意:本次修复的是"地址没进二维码"。手机此前也直接探测过网关 192.168.137.1:39393 并且失败,说明 Windows 在 ICS 虚拟网卡上仍未接受 连接——那是防火墙配置文件的问题,需要在接收页点「放行防火墙」 (规则会以 profile=any 重建,覆盖该网卡的网络类型)。
This commit is contained in:
+11
-2
@@ -604,6 +604,15 @@ impl QftApp {
|
||||
ui.vertical_centered(|ui| { let side = snap_to_physical(side, ui.ctx().pixels_per_point());
|
||||
ui.image((texture.id(), egui::vec2(side, side))); });
|
||||
}
|
||||
// 把二维码实际广播的地址摊开显示。手机报"找不到电脑"时,
|
||||
// 第一件要确认的就是码里到底有没有它能到达的那个地址——
|
||||
// 在这里一眼可见,不必等手机端的诊断。
|
||||
ui.collapsing("二维码广播的地址", |ui| {
|
||||
for endpoint in pairing::qr_endpoints(listen_port, self.receive.direct_ap.is_some()).iter().take(4) {
|
||||
ui.monospace(endpoint);
|
||||
}
|
||||
ui.small("手机连上后会依次尝试这些地址;其中必须有一个与手机同网段。");
|
||||
});
|
||||
if let Some(ap) = &self.receive.direct_ap {
|
||||
ui.label(format!("临时网络:{}", ap.ssid));
|
||||
ui.small("网络身份会在这台电脑上复用以减少重复确认;每次接收仍会生成新的会话 Token。");
|
||||
@@ -1014,7 +1023,7 @@ impl QftApp {
|
||||
pc_name: self.local_device.clone(),
|
||||
transport: "http-parallel-v2".into(),
|
||||
port: server.port,
|
||||
endpoints: pairing::local_ipv4_endpoints(server.port),
|
||||
endpoints: pairing::qr_endpoints(server.port, self.receive.direct_ap.is_some()),
|
||||
wifi,
|
||||
direction: PairingDirection::Upload,
|
||||
file_name: None,
|
||||
@@ -1094,7 +1103,7 @@ impl QftApp {
|
||||
pc_name: self.local_device.clone(),
|
||||
transport: "http-download-v2".into(),
|
||||
port: server.port,
|
||||
endpoints: pairing::local_ipv4_endpoints(server.port),
|
||||
endpoints: pairing::qr_endpoints(server.port, self.send.direct_ap.is_some()),
|
||||
wifi,
|
||||
direction: PairingDirection::Download,
|
||||
file_name: Some(file_name),
|
||||
|
||||
Reference in New Issue
Block a user